MODEL HMA
HMA series tube is metal for applications that can take to high temperature and high pressure. It is suitable for opaque medium. It can indicate flow rate directly or with mechanical indicator that is made by magnetic coupling system. This series is similar to glass tube type.
MODEL HMB
HMB series is same as KMA series, but has additional functions by addition of air-chamber to prohibit influx of fluid. it can use in high temperature with cooling fin Optional.
MODEL HMS
HMS series is suitable for the measurement of most liquid and gas low flow rates when are installed at small space. Contact our factory for the many requirements available on this series.
MODEL HMSS
HMSS series is made for measuring low flow in high pressure condition. It’s functions are local indicating and alarm output. It is available for vertical or horizontal installation simply.
MODEL HMVS
HMVS Series has the characteristics of solid, stead and widely used. It is suitable for liquid, gas.
MODEL HM
HM series is suitable for the measurement in high temp. and press. As the fluid passes through the tube at varying speeds, the float up or down, maintaining a dynamic balance between the upward and downward forces acting on the float and the fluid. The magnetic coupling system of the float in the tube indicates the flow rate. The metering tube includes a scale where flow rate can be read manually.
MODEL HMF-S
This model has the function that outputs such as indication, continuous 4~20mA.DC, 2-wire loop powered system.
MODEL HMF-EX [EEX Proof]
HMF-EX Series is certificated (flame proof enclosure d IIC T6) by KTL in korea. This is suitable for hazardous area. Direct reading & transmission can be selected over a wide range of flowrates to suit each particular liquid and gas being measured. There are no require ments for straight pipe, upstream or downstream of meter
MODEL HMF-TH [HART PROTOCOL]
This model has the function that outputs such as indication, continuous 4~20mA.DC, 2-wire loop powered & Hart Protocol system.
MODEL HMT [PTFE Lined Flow Meter]
These flow meters have excellent corrosion resistance by teflon lining in inner-section.
MODEL HMFS [Sanitary Type Metal Tube Flow Meter]
HMFS Series is a series of metal tube sanitary rotameters. All liquid wetting parts are made of stainless steel and electro-polished. Also teflon sealing is used to offer better sanitary specification. Different functions are available to meet process control requirements.
MODEL HMQ
HMQ Series is new one of metal tube type with mechanical & digital type flowrate, totalizer and easily operation. It could also measure liquid, gas and steam. especially fit for various application.
